2024 Vermeer® Stump Cutters SC382
- Year 2024
- Make Vermeer®
- Model Stump Cutters
2024 Vermeer® Stump Cutters SC382
2024 Vermeer® Stump Cutters SC382
This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities.
Features may include:
Standard four-wheel driveThe SC382 stump cutter is equipped with standard four-wheel drive to offer traction and maneuverability in difficult transport conditions.
Operator presence systemThe operator presence system is intended to enhance operator safety by automatically stopping the cutter wheel when the operator releases the hydraulic cutter wheel controls.
37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engineThe SC382 stump cutter has a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine.
Engine
Engine Manufacturer
Briggs & Stratton Vanguard
Emissions
EFI
Cylinder Liners
2
Engine Power
Gross (Maximum): 37 hp
Engine Torque, Maximum
49 ft-lb
Air Cleaner
Dry-type safety element and restriction indicator
Oil Filter
Spin-on
Cooling
Medium: Air
Fuel System
Fuel System
Max Fuel Consumption: 3.2 gph
Fuel Type
Gas
Drivetrain
Clutch
Electric clutch with brake
Steering
Steerable Axle Type: Hydraulic steering, oscillating axle
Suspension
Suspension
Rigid/fixed (rear)
Wheels & Tires
Tires, Rear Specification
5.7"x 8" (14.5 x 20.3 cm) dual standard
Brakes
Brake System Type
Spring-applied, hydraulic release at rear motors
Battery
Battery
400 CCA
Electric
Alternator
20/50 amp (rpm-based)
Electrical
System Voltage: 12 V | Shutdown System: Engine low oil pressure
Operational
Operating Speed
Cutterwheel: 1560 rpm | Low Speed Travel: 65 ft/min | High Speed Travel: 130 ft/min
Hydraulics
Hydraulic Type
System Type: Open-loop series system
Hydraulic Pump
Flow at Maximum RPM: 6.4 gpm
Maximum Pressure
System relief: 2470 psi
Chassis
Frame Type
Welded tube and plate steel
Lights and Safety
Lighting
Warning: Oil pressure, engine fault, operator presence status, clutch engage/disengage status
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 25 deg | Cutterwheel Diameter without Teeth: 17 in | Cutterwheel Thickness: .5 in | Cutterwheel Straight Line Dimension: 47 in | Cutterwheel Cut Above Ground: 24 in | Cutterwheel Cut Below Ground: 15 in | Chip Containment: 7.5 cu ft | Jackshaft Dimension: 1.3 | Bearing Dimensions: 1.3 bore | Cutterwheel Shaft: 1.8" (4.8 cm) | Bearing Dimensions - Secondary Belt: 1.8" (4.8 cm) double spherical roller pillow block | Degree of Oscillation: 12 deg | Blade Travel Above Ground: 8 in | Blade Travel Below Ground: 2.5 in
Length
118 in
Width
50.1 in
Height
53 in
Overall Width
Transport (without duals): 35.5 in
Capacities
Fuel Capacity
Tank: 10 gal
Oil capacity
Volume with Filter: 2.5 qt
Hydraulic Capacity
Tank: 6.5 gal
Weights
Weight
1950 lbs
Features
Features
Number of Teeth: 20 | Number of Indexes: 2 | Number of Pockets/Teeth: 20 | Jackshaft Bearing Type: Sealed ball | Filtration Method: 10 micron fill strainer and 6 micron return filter | Flow Control: SmartSweep | Directional Control: Electric over hydraulic | Switches: Two-speed 2x4 and 4x4 ground drive, cutter wheel engage/disengage, creep, blade (if applicable) | Controller: Danfoss | Control Station Description: Fixed side location | Axle: Rigid
Oil Type
Recommended: 10W30 | hydraulic Recommended: Vermeer HyPower 68
Belt Type
V-belt
Belt Quantity
Number of Primary Belts: 2 individual (matched pair) | Number of Secondary Belts: 6 banded