2024 Vermeer® BC1800XL 1800XL
- Year 2024
- Make Vermeer®
- Model BC1800XL
- Engine
2024 Vermeer® BC1800XL 1800XL
2024 Vermeer® BC1800XL 1800XL
Whether you are a municipality or a tree service company and working on a jobsite which calls for large-diameter chipping, look to the Vermeer BC1800XL gas brush chipper. Built with strength for demanding conditions, it has the power needed for land-clearing and tree care operations. The BC1800XL gas brush chipper is equipped with features such as patented SmartFeed control system, EcoIdle™ engine control system, Tree Commander™ remote control and bottom feed stop bar for increased operator safety.
Features may include:
Vertical feed rollersReduce vibration and structural loading to the rear of the machine with vertical feed rollers designed with helical cleats that hold material more firmly.
Improved operator safetyImproved operator safety with a 62.5-in (158.8-cm) long feed table for extra distance and exclusive bottom feed stop bar system.
Tree Commander™ remote controlWith the standard Tree Commander™ remote control, jobsite productivity is improved by allowing the operator to control brush chipper functions remotely.
Engine
Engine Manufacturer
Origin | Linkbelt | Option One: Dexter
Engine
Displacement
6.2L
Cylinder Liners
8
Engine Power
Gross (Maximum): 172 hp
Engine Torque, Maximum
322 ft-lb
Air Cleaner
2 Stage Dry
Oil Filter
Spin-on
Cooling
Medium: Liquid
Bore
2.9 in
Motor
Displacement
28.4
Motor Type
Manufacturer: White RE470
Fuel System
Fuel System
Max Fuel Consumption: 11.7 gph
Fuel Type
Gas
Drivetrain
Clutch
13" Spring Loaded Clutch | Drive Engagement: Manual Lever
Suspension
Suspension
Torflex
Wheels & Tires
Tires, Rear Specification
Option One: 235/75R17.5 load range H
Brakes
Brake System Type
Electric
Battery
Battery
950 cca
Electric
Electrical
System Voltage: 12 | Switches: Control Panel: Ignition, throttle, Smartfeed, and ECOIdle. Rear: Lower feed bar sensitivity | Display: MFD | Shutdown System: High temp, low pressure | Radio Remote Control: Tree Commander
Alternator
70
Operational
Operating Speed
Feed: 117 ft/min | drum: 1100
Performance
Noise Level
124
Hydraulics
Hydraulic Type
System Type: open Center
Hydraulic Pump
Pump Flow at Maximum RPM: 6.3 gpm
Maximum Pressure
System relief: 2850 psi | Auto Reverse: 2650 psi | Winch Relief System: 3000 psi
Airflow
3544 cfm
Chassis
Chassis
Tongue Description: 4 x 4 x 0.375 / Extension: Two 12" Increments (for non winch)
Frame Type
7" x 2.13" Channel
Hitch/Type
Pintle
Lights and Safety
Safety Features
LED | Safety Lock - Number of Positions: 4 | Rotational Lock: Self Lock
Dimensions
Dimensions
Maximum Angle of Continuous Operation: 20 deg | Feed Roller Dimension: 23.5" x 18" | Feed Roller Dimension (Two): 23.5" x 18" | Infeed Throat Capacity: 20" x 24" | Distance from Feed Table to Ground: 30.5 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg / Reduced: 12 deg | Diameter: 2 in | Material Thickness: 11 in | Material Capacity: 19 in | Thickness: .5 in | Diameter: 36 in | Knife Thickness: .6 in | Knife Size: 0.625 x 5 x 10 | Bedknife Size: 3" x 20.25" | Bedknife Thickness: 1.3 in | Bottom Thickness: .1 in | Top Thickness: .2 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Rope: 7/16" | Rope Line Pull: 2000 lbs | Rope Choker: 1/4"
Length
Feed Table Up, Tongue In: 177 in | table Down, Tongue Extended: 231 in | Infeed Table: 36 in | Rope: 150 ft
Width
78.5 in | Infeed Table: 67 in | drum: 26.2 in
Height
107 in | Infeed Hopper: 34 in | Chute: 110 in
Fan Diameter
18.7
Wheels
Option One: 17.5" x 6.75" BC of 8 on 6.5"
Capacities
Fuel Capacity
Tank: 50 gal
Oil capacity
Volume with Filter: 5 qt
Features
Dynamic Capacity: 41800 lbs | Static Capacity: 71500 lbs | Option One: 10,000
Cooling System
Coolant Capacity (Engine and Radiator): 5 gal
Load Capacity, Land
Feed Roller Clamp Load: 380 lbs
Hydraulic Capacity
Tank: 12 gal
Weights
Weight
Without winch and hydraulic jack: 8800 lbs | with winch, hydraulic jack and hydraulic chute: 9300 lbs | of Feed Roller: 116 lbs | With Shaft: 1160 lbs
Features
Features
Feed Roller Orientation: Vertical | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Spring | Number of Feed Roller Motors: 2 | Reset Method: Green Hold to Run Button | Positions: 4: E-Stop, Forward, Neutral, Reverse | Useable Edges: 2 | Number of Paddles: 12 | Fixture Method: Weld on | Bedknife - Number of Useable Edges: 4 | Rotation Type: Worm gear with rotational lock | Filtration Method: 3 micron return, 100 micron suction | Fender Description: Integrated | Trailer Light Type: LED | Cutter Drive: Spherical roller | Belt Idler/Tensioner: Spring loaded | Controller Vermeer: ACS: CB02 | Display: MFD | Shutdown System: High temp, low pressure, | Radio Remote Control: Tree Commander | Type - Option One: Rubber Torsional | Winch Controls: Forward, Reverse, Free Spool
Oil Type
Recommended: API | hydraulic Recommended: Vermeer VMF
Construction Material
A8 Modified Chipper Steel | Bedknife: 1018 CD | Winch Boom: Structure 0.25 GR50
Knife Quantity
(2): 11 | 4 | Number of Bolts/Knife: 5