Current Vermeer® Rental Brush-Chippers BC1200XL

2024 Vermeer® BC1200XL 1200XL

2024 Vermeer® BC1200XL 1200XL

Swipe to View More

  • Year 2024
  • Make Vermeer®
  • Model BC1200XL
  • Engine Model: Origin 4.3 | Option One: Dexter axle
Shop Vermeer® Pre-Owned
Product Details Specifications Photos
2024 Vermeer® BC1200XL 1200XL

2024 Vermeer® BC1200XL 1200XL

  • Year 2024
  • Manufacturer Vermeer®
  • Model Name BC1200XL
  • Trim Name 1200XL
  • Generic Type (Primary) Brush
  • Engine Model: Origin 4.3 | Option One: Dexter axle
  • Cylinder Liners 6
  • Engine Power Gross (Maximum): 115 hp
  • Engine Torque, Maximum 231 ft-lb
  • Air Cleaner 2-stage dry with safety valve
  • Oil Filter Spin-on
  • Bore 2.4 in
  • Cooling Medium: Liquid
  • Engine Manufacturer Cutter Drive: Linkbelt

2024 Vermeer® BC1200XL 1200XL

The electronic fuel injection engine provides improved fuel economy with 115 horsepower (85.8 kW). This allows for more efficient working conditions and boosts engine response under load.

See your Vermeer dealer for comprehensive service and genuine Vermeer replacement parts.

Features may include:

Dual horizontal offset feed rollers

Get more done thanks to the aggressive feeding action of dual horizontal offset feed rollers.

SmartFeed system

Protect your engine with the SmartFeed system, which monitors engine speed and stops or reverses the feed rollers if needed.

Clutchless PTO system

Prevent premature wear to the belt drive system using the clutchless PTO system, which prevents high-speed engagement of the cutter drum.

Electronic fuel injection engine

With improved fuel economy, the 115-hp (85.8-kW) Origin gas engine allows for more efficient working conditions and boosts engine response under load.

Engine

Engine Model: Origin 4.3 | Option One: Dexter axle
Cylinder Liners 6
Engine Power Gross (Maximum): 115 hp
Engine Torque, Maximum 231 ft-lb
Air Cleaner 2-stage dry with safety valve
Oil Filter Spin-on
Bore 2.4 in
Cooling Medium: Liquid
Engine Manufacturer Cutter Drive: Linkbelt

Motor

Motor Type Manufacturer: White Hydraulic

Fuel System

Fuel Injection Electronic
Fuel System Max Fuel Consumption: 8.3 gph
Fuel Type Gasoline

Suspension

Suspension Torsion

Brakes

Brake System Type Electric

Wheels & Tires

Tires, Rear Specification Option One: ST235/80/R16 Load Range E | Option Two: ST285/75/R16 Load Range E

Battery

Battery Group 31; 950 CCA

Electric

Electrical System Voltage: 12 volt | Switches: Lower feed stop bar senstivity, toggle, SmartFeed and Ecoldle | Controller: Vermeer ACS | Display: LCD | Shutdown System: High temperature, low pressure
Alternator 70 Amp

Operational

Operating Speed Feed: 110 ft/min | drum: 2000 rpm | Winch Input: 51 rpm
Operating Conditions Actuation Force: 34 lbs | Rope Line Pull: 2000 lbs

Performance

Noise Level 124 dB(a)

Hydraulics

Hydraulic Type System Type: Open center, dual pumps
Hydraulic Pump Flow at Maximum RPM: 4.5 gpm
Maximum Pressure System relief: 2500 psi | Auto Reverse: 2500 psi | Winch Relief System: 2200 psi
Airflow 2000 cfm

Chassis

Chassis Tongue Description: 2.5" x 4.5" x 0.38" (6.4 cm x 11.4 cm x 9.5 mm) | Tongue Extension: Extendable 18" (45.7 cm) | Fender Description: Bolt-on
Frame Type 7" (17.78) Z channel; 0.25" (0.64 cm) thickness
Hitch/Type Pintle

Lights and Safety

Safety Features Lock - Number of Positions: 2 | Trailerype: LED

Dimensions

Dimensions Feed Roller Minimum Distance to Drum: 1 in | Feed Roller Dimension: 15 | Feed Roller Dimension (Two): 11.1" (28.3 cm) | Infeed Throat Capacity: 13.3" x 17" (33.7 cm x 43.2 cm) | Pinch Point - Distance to End of Feed Table: 67.4 in | Distance from Feed Table to Ground: 27.2 in | Infeed Table Material Thickness: .2 in | Bottom Feed Stop Bar Diameter: 2 in | Bottom Feed Stop Bar Material Thickness: 11 GA | Normal Sensitivity: 22 deg | Reduced Sensitivity: 12 deg | Diameter: 2 in | Material Thickness: .1 in | Material Capacity: 13.3 in | Thickness: .4 in | drum: 20 in | Knife Thickness: .6 in | Knife Size: .625" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | Bedknife Size: 3.5" x 17.3" (8.9 cm x 43.8 cm) | Bedknife Thickness: 1 in | Bottom Thickness: .1 in | Top Thickness: .1 in | Side Wall Thickness: .1 in | Deflector Thickness: .1 in | Chute Rotation Angle: 270 deg | Winch Boom Structure: .25" (6.4 mm) Grade 50 | Winch Rope: 7/16' (1.11 cm)
Length Feed Table Up, Tongue In: 168 in | Table Down, Tongue Extended: 206 in | Infeed Table: 30.1 in | Rope: 150 ft
Width 79 in | Infeed Table: 52 in | Drum: 20 in
Height 103 in | Infeed Hopper: 32 in | Chute: 104 in
Fan Diameter 19" sucker
Wheels Option Two: 16" (40.6)

Capacities

Oil capacity Volume with Filter: 4.5 qt
Cooling System Coolant Capacity (Engine and Radiator): 4 gal
Load Capacity, Land Feed Roller Clamp Load: 2650 lbs
Hydraulic Capacity Tank: 12 gal
Features Dynamic Capacity: 31400 lbs | Static Capacity: 53500 lbs | Option On:e 7000 lb (3175.2 kg)

Weights

Weight Weight - Option One: 5680 lbs | Tongue - Option One: 660 lbs | of Feed Roller (Option Two): 80 lbs | Of Feed Roller: 150 lbs | With Shaft: 480 lbs

Features

Features Feed Roller Orientation: Horizontal | Number of Feed Rollers: 2 | Feed Roller Clamp Type: Hydraulic cylinder | Number of Feed Roller Motors: 2 | Reset Method: Dual green hold-to-run buttons | Positions: Four positions: Emergency stop, forward, and reverse | Useable Edges: 2 | Number of Paddles: 5 | Fixture Method: Weld-on | Bedknife - Number of Useable Edges: 4 | Number of Bearings: 2 | Rotation Type: Manual pivot with handle | Filtration Method: 10 micron return, 100 micron suction | Cutter Drive: Type Spherical roller | Type - Option One: Rubber torsional | Winch Controls: Forward, reverse and free spool | Rope Choker: Detachable chain choker
Oil Type Recommended: SAE 10W30 | hydraulic Recommended: Vermeer VMF
Construction Material A8 chipper steel | Bedknife Material: 1018
Knife Quantity 8 / 2: 12 | Number of Knives: 2 | Number of Bolts/Knife: 4
Belt Type 5V

Product Photography