Hydraulic implement flow rate 8.5gpm to 14.9gpm - Standard motor
Hydraulic implement flow rate 15gpm to 20gpm - High capacity motor (Special Order Only)
Hydraulic rear remotes* or third function. ONLY Pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS)
We do not recommend rear remote plumbing as some tractors may lose loader priority
NOT COMPATIBLE WITH DIVERTER VALVES
Minimum dry tractor weight of 3000 lbs
Minimum tractor width of 55 inches
Certified roll over protection system
For stabilization while operating the Lane Shark, fill rear tires of your tractor with water for use as a ballast, as well as additional weight on rear. ie: box blade, or rotary cutter.
MoreLess
Limited Time Offer!
Selling Price -$4,700.00
The Lane Shark LS4 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.
Cutting width / cutting area of 44"
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
Multi-position adjustment rail for added versatility and an extra foot of vertical extension
The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
Rear rubber skirt and skid shoes for a smoother cutting process
The Lane Shark LS4 weighs just under 450 lbs.
When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
NOT COMPATIBLE WITH SKID STEERS
Cutting width / cutting area of 44"
Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. Cutting width is 44". The LS4 has a wide range of cutting positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions
Multi-position adjustment rail for added versatility and an extra foot of vertical extension
The Lane Shark LS4 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.
Rear rubber skirt and skid shoes for a smoother cutting process
The Lane Shark LS4 weighs just under 450 lbs.
When purchasing the Lane Shark brush cutter, you will receive a unit equipped with #10 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 1/2” is required.
NOT COMPATIBLE WITH SKID STEERS
- $4,700.00
- Blackshear, Georgia
- New
- LSLS41266
- 2024
- LANE SHARK
- LS4
- Available